Equi-Pak|CS 50cc Kit for the Shod Foot



			PRODUCTS > Sole-Guard > 180cc Cartridge 50cc Cartridge Equi-Pak\|CS > 180cc Cartridge 50cc Unshod Foot 50cc Shod Foot Equi-Pak Equi-Pak\|Soft Equi-Build Sil-Pak Super Fast > 180cc Cartridge 50cc Cartridge Adhere > 180cc Cartridge 50cc Cartridge Accessories COMPARE PRODUCTS > Which Vettec products are right for you? FAQ's > Sole-Guard Equi-Pak\|CS Equi-Pak Equi-Build Sil-Pak Super Fast Adhere Technical Help MSDS > Sole-Guard Equi-Pak\|CS Equi-Pak Equi-Pak\|Soft Equi-Build Sil-Pak Super Fast Adhere Safety Info EVENTS > Tradeshows "How-to" Clinics DOWNLOADS > Step-by-Step Handbook Product Instructions Dealer Application WHERE TO BUY > Dealer Request

Soft Instant Pad Material for Thrush for 2 average size feet! (00-0)

PRODUCT INFORMATION

Infused with copper sulfate to effectively manage mild and moderate cases of thrush.

• Use as a preventative measure during wet seasons
• Eliminates the need to pick out feet daily
• Bonds to the sole, sealing out dirt and debris
• Provides protection and support
• Allows for fast, thick hoof wall and sole growth

NOTE: Equi-Pak|CS™ is a fast setting (45 seconds) liquid urethane hoof packing material infused with copper sulfate for the treatment and prevention of thrush. Equi-Pak|CS protects both the frog and sole and eliminates the need to pick out the feet or apply daily medication.

Description

Color

Item

Sugg. U.S. Retail Pricing

Equi-Pak|CS 50cc Kit

46103

$20.00

Included in kit:

2 - 50cc Equi-Pak|CS Automix Cartridge

Green

4 - Automix Tips

1 - Plunger

1 - Finger Ring

Instructions Equi-Pak\|CS 50cc Cartridge


PLEASE NOTE BEFORE APPLYING PRODUCT • Vettec products are best used between 65°- 85° F (18°- 29° C). • Areas of bleeding, abscesses or severe thrush should not be covered. Once healed, commence using products. • Use of disposable gloves is recommended. • Do not burn or “Hot Shoe” this product. • Use only Vettec mix tips. • This procedure should be performed on a clean, flat work area. CARTRIDGE PREPARATION 1. To open, remove the tip of the cartridge (at designated groove) with nippers or knife. Ensure a clean straight cut along groove. 2. Slide the red oval finger ring over top of cartridge and seat at cartridge base. 3. Use the red plunger to squeeze out a small amount of material to ensure both sides are dispensing evenly. 4. Attach mixing tip by pressing and twisting clockwise. 5. For additional applications, remove old tip, re-equalize the cartridge, and attach another mix tip. HOOF PREPARATION 1. Remove all loose sole and dirt with a wire brush. 2. Clean frog and commissures. Remove any dirt or debris where the shoe meets the sole. 3. Have all materials ready before proceeding to the next step. 4. If possible dry sole with heat gun or hair dryer immediately before applying Equi-Pak\|CS. APPLICATION PROCEDURE 1. Dry the sole and frog thoroughly with a heat gun or hair dryer if possible. 2. Nail the shoe into position. If the sole is flat, seating out the shoe is advised. 3. With the frog turned upward, apply Equi-Pak\|CS underneath the web of the shoe and fill in the sole until the desired level is achieved. This is usually to the top of the shoe. 4. Hold the hoof until the Equi-Pak\|CS sets, approximately 45-60 seconds, then release. 5. Trim any excess material. 6. Allow 10-15 minutes before riding. Download Instruction PDF: English For professional use only. Keep out of reach of children. Back to Top